Noctua NF-A4x10 on 23/7 ???

[skylargray]

You know...what would actually work better would be a relay that switches with 3V DC input. This would need a basic protection circuit.

[mmattys30]

Yes I like the sound of this as my fan is on 24/7 even when powered off but I don't mind as how hot these run is not good for there longevity

[jimlab7]

You know...what would actually work better would be a relay that switches with 3V DC input. This would need a basic protection circuit.

Sounds good when you get it figured out just let me know what parts i need and how too hook it up ^^

[arm206]

This is what I did...
Grab a generic NPN switching transistor with a resistor and use the +5V supplied by the USB port to switch the +12V for the fan on/off.
The fan will be on whet the unit is on, and off when the unit is completely off (it will run when the uint is 'sleeping'/standing by).
I consider this as a temporally solution, until the heating issue gets fixed.

Pic here.

[tjsooley]

You know whats strange. My Noctua fan is on 24/7 as long as the unit is plugged in even off. its strange I replaced it with the stock fan and the stock fan is the same. I checked the board and its fine. I have been playing with the kernel settings via performance control and its rooted but all is good. the hottest I have been able to get it streaming 1080P from my mac to it via ethernet is 138F which is ~ 58C so I am happy until my 3D printer comes and I can make a proper case.