LIST: Controllers That Work With OUYA

[flclfanman]

I just tested and can confirm that the Gamestop Afterglow Controller for PS3 (wired) DOES work with the Ouya menu, some games and emulators(GBC,SNES) but the button mapping is a little wonky

 

[smobydick]

Hello,


ive got this one Thrustmaster run'n'drive :

 

With usb dongle
It works, but mapping buttons is different

[xcript]

Just tried a GameShark Pad Pro (wired classic Xbox controller) and it worked pretty well. I cut the end off the breakaway cable and put a standard USB connector on it a while ago.

 

I successfully tested it with a few emulators (NES, SNES, N64), TowerFall & Super Crate Box. I noticed I had to use the left analogue stick as the d-pad didn't work. However, the d-pad does work in the Ouya menu, so I imagine you could get it to work in any app that allows for control remapping.

Also, there's nothing on the Pad Pro analogous to the Ouya button so not sure if there's a way to exit back to the Ouya menu if the app doesn't have an "exit" button of its own.

[RandalphTheBlack]

Just wanted to add this.
I have usb dongles from this site:
http://www.retrousb.com/index.php?cP...87ebe352b50f7a

I've used both his NES and SNES adapters, and they work perfectly.

Just wanted to add this.
I have usb dongles from this site:
http://www.retrousb.com/index.php?cP...87ebe352b50f7a

I've used both his NES and SNES adapters, and they work perfectly.

I'll add, however, that I've only had one plugged in at a time, and specifically the controller-through-dongle setup.
I'd like to see what happens if multiples (dongle or hard-wired controller) are plugged in, or if dongle AND hard-wired are in at the same time.
They're probably seen as the same thing, but I'm only speculating.

[Tomato]

Not Working: Logitech GT Racing Wheel (USB)

[treismac]

Just wanted to add this.
I have usb dongles from this site:
http://www.retrousb.com/index.php?cP...87ebe352b50f7a

I've used both his NES and SNES adapters, and they work perfectly.

Is there any lag to speak of?

[jackthelion]

I tried this without success:

http://www.amazon.com/Classic-USB-NE...nes+controller

[Failrunner]

 

I tried a few controllers on the OUYA to see if they worked with it. I tried:

Wii Pro U Controller (Third-Party Bluetooth)- doesn't pair with the system in the system menu (asks for a passkey/code when attempting to pair but no set of numbers will work).



Power A Mini Pro EX XBOX 360 Controller (Third-Party Wired USB) - doesn't work when plugged into USB port nor through a USB hub plugged into the USB port.



What I'd like to know is if these controllers can work with the OUYA:

Nyko Raven PS3 Controller (Wireless USB Dongle)



Power A Pro Wireless PS3 Controller (Wireless USB Dongle)

I tried the wired power a and it works as if it were the ouya controller without the touchpad and horrible d-pad. It supports games that only work with the ouya controller.

[CadmiumRED]

I tried the wired power a and it works as if it were the ouya controller without the touchpad and horrible d-pad. It supports games that only work with the ouya controller.

Wha? How did you do it? I couldn't get it to work at all, the center part of the controller just kept blinking and blinking and wouldn't stop.

[Failrunner]

Wha? How did you do it? I couldn't get it to work at all, the center part of the controller just kept blinking and blinking and wouldn't stop.

It was blinking but it worked. I had the Ouya controller off. The console thinks it's an Ouya controller and if the controller is paired it won't work. However the Ouya controller won't pair once the power a is paired. I'm guessing the ouya controller has to be re-paired as controller 2.