WIP: mini NES case

[skylargray]

Here is where you can solder a power switch (momentary-type ONLY!).
If you use an SPST switch, it will have only two pins. It doesn't matter which pin goes where as long as one pin from the switch is soldered to SW1a, and the other pin is soldered to SW1b.

[jimlab7]

Here is where you can solder a power switch (momentary-type ONLY!).
If you use an SPST switch, it will have only two pins. It doesn't matter which pin goes where as long as one pin from the switch is soldered to SW1a, and the other pin is soldered to SW1b.

 

thanks man ^^ cant wait to see how your case comes out