WIP: mini NES case

[skylargray]

so have u found a red led your using for this project and if so what one since im going to buy one i would like to not buy too many wrong ones like i did with my usb hubs xD

Lumex SSL-LX3353ID

http://www.mouser.com/Search/Product...6-SSL-LX3353ID

[jimlab7]

Lumex SSL-LX3353ID

http://www.mouser.com/Search/Product...6-SSL-LX3353ID

thanks ^^ i got an idea and went for it and it works had a broke ps2 controller and took the led from it and filed the tip to a lil square and stuck it in and soldered wired to it and works like a dream xD

but tyvm for taking the time to help me out ^^

You wouldn't happen to know what 2 soldering points on the ouya for the power button?

[skylargray]

Here is where you can solder a power switch (momentary-type ONLY!).
If you use an SPST switch, it will have only two pins. It doesn't matter which pin goes where as long as one pin from the switch is soldered to SW1a, and the other pin is soldered to SW1b.

[jimlab7]

Here is where you can solder a power switch (momentary-type ONLY!).
If you use an SPST switch, it will have only two pins. It doesn't matter which pin goes where as long as one pin from the switch is soldered to SW1a, and the other pin is soldered to SW1b.

 

thanks man ^^ cant wait to see how your case comes out