WIP: mini NES case

[XanXic]

More than the OUYA.

oooohhhh. :c that's a shame. I'd probably just buy a broken NES and shove my ouya in there in that case. Still should be pretty awesome what you got going on there.

[JerTM]

prototypes could be spendy, as of right now its a one-off so it will cost more than a hundered. I would pay more than most would for one, not thousands but more than an OUYA if I had to. Fantastic designing, classis style, and an improvement tempwise over the stock case. Its no vinyl skin that's for sure.

[jimlab7]

how do u plan to add extra usb ports?

[skylargray]

how do u plan to add extra usb ports?

With one of these:
http://www.amazon.com/gp/product/B005HKIDF2/

You pull this hub out of its case, and I have made accommodations on the front of my mininess case specifically for it.
I have already confirmed that this hub works with the OUYA and my USB thumb drive/card reader.

[Manaurys]

I hope you can mass produce these i like it pretty much

Shaoranmps

[jimlab7]

With one of these:
http://www.amazon.com/gp/product/B005HKIDF2/

You pull this hub out of its case, and I have made accommodations on the front of my mininess case specifically for it.
I have already confirmed that this hub works with the OUYA and my USB thumb drive/card reader.

so do u think a 4way hub would be to much for the ouya?

[JerTM]

ok, got the usb on order lol I can't wait to see the prototype

[skylargray]

so do u think a 4way hub would be to much for the ouya?

If it's a self-powered hub, it should work fine.
If it relies on the host for power, then you only get 125mA per port. This will cause many devices to not enumerate. It's my understanding that the OUYA is already pretty picky about USB device enumeration as it is, so a 4-port hub just sounds like asking for trouble.

[jimlab7]

If it's a self-powered hub, it should work fine.
If it relies on the host for power, then you only get 125mA per port. This will cause many devices to not enumerate. It's my understanding that the OUYA is already pretty picky about USB device enumeration as it is, so a 4-port hub just sounds like asking for trouble.

so im finding out xD

---

so have u found a red led your using for this project and if so what one since im going to buy one i would like to not buy too many wrong ones like i did with my usb hubs xD

[skylargray]

so have u found a red led your using for this project and if so what one since im going to buy one i would like to not buy too many wrong ones like i did with my usb hubs xD

Lumex SSL-LX3353ID

http://www.mouser.com/Search/Product...6-SSL-LX3353ID