PART 2

After taking my Ouya enclosure to work I drilled my pilot hole out and made the first punch.




Now of course...the knockout punch!


CRUNCH


-and the hard part is over!


Test fit


Once I got it all home I set the port with some adhesive and waited...


Internal pic after re-assembly with the port installed



Re-assembled!
I tried to get some shots in better light showing all my mods so far including a view of the fan, but it is difficult without real lighting





So there you go, one cold air intake modification to a stock Ouya enclosure!
With the fan drawing in fresh air from outside the case it effectively pressurizes it and air now exits through the top and bottom vents.

Next: LED!